Found In the Woods

After many, many years, I got my airbrush back up and running. A couple years ago I built a booth for it but never got around to spraying anything. Over the last several years I've also been slowly collecting Airbrush parts such as valves, water trap, pressure gauge, hoses, fittings and nozzles. Last night, inspired by some free time I had, I got everything up and running and did some trials on some old HO scale engine shells that I had stripped years ago .

The results were promising. The booth performed pretty well, although when spraying, I had to hold the model up high to allow the spray to vent through the duct. If I held it low, the spray tended to circulate around and exit the booth. Oh well. The good part is that my wife could not smell anything upstairs while I was spraying.

I did a simple coat of Floquil Railroad Colors Primer Gray which I thinned with 25% Dio-Sol. This was a real adventure, as I've never been very precise with my paint mixing before and now I'm totally into it. I used Testors Pipettes to measure and distribute the paint to the spray jar. The paint dried a ilttle "chunky" or "dusty" on the model, and I'm not sure why. It seemed that I could wipe it off the model in some places. I think the air-paint ratio was off, but again, I'm still learning. Overall, I'm super satisfied at just getting it running again.

I am excited to continue painting. I plan on painting the two diesel shells up in B&O livery and the trolley shell in DC Transit livery. The DCT trolley will definitely find its way onto the layout some day. Next up, I hope to do some weathering practice on some rolling stock and engines.